抗压制干扰的目标跟踪功率动态管控方法

    Power Dynamic Control Method for Target Tracking Against Suppressive Jamming

    • 摘要: 针对压制干扰下,现有目标跟踪功率动态管控方法因功率变化剧烈导致跟踪性能不稳定的问题,提出基于弱敏感交互多能级的目标跟踪功率动态管控方法。首先,分析压制干扰下目标跟踪功率管控的影响因素,建立电子侦察接收机参数未知下的功率优化模型;然后,设计功率动态估计框架,根据不同回波脉冲序列等效的功率能级交互信息进行功率估计,并结合目标运动状态对估计结果进行修正,有效解决目标跟踪过程中由目标状态突变、压制干扰突发引起功率变化不稳定的问题;最后,在典型机动目标跟踪场景下进行仿真,仿真结果表明,与当前交互多能级算法相比,所提方法使雷达发射功率调整更加稳定,显著提高了压制干扰下目标跟踪精度。

       

      Abstract: A power dynamic control method based on weak-sensitivity interactive multiple power( WSIMP ) is proposed to solve the problem of unstable tracking performance caused by drastic power changes in current power dynamic control methods for target tracking under suppressive jamming. Firstly, the influencing factors of power control for target tracking under suppressive jamming are analyzed, and a power optimization model is established under the condition that the parameters of the electronic reconnaissance receiver( ERR ) are unknown. Then, a power dynamic estimation framework is designed to estimate the power based on the interaction information of power levels which are indicated by different echo pulse sequences, and the estimation results are modified by incorporating the target motion state, which effectively addresses the issue of unstable power change caused by the sudden change of target state and the occurrence of suppressive jamming during target tracking. Finally, simulations are conducted in a typical maneuvering target tracking scenario. The simulation results demonstrate that, compared with the current interactive multiple power algorithm, the proposed method makes the radar transmit power adjustment more stable and significantly improves the target tracking accuracy under suppressive jamming.

       

    /

    返回文章
    返回